Tag Archives: nfs configuration in hpux

NFS configuration in Linux and HPUX

Learn how to configure the network file system (NFS) in Linux and HPUX servers. Howto export NFS, start/stop NFS services, and control access on it.

NFS configurations

The network file system is one of the essential things in today’s IT infrastructure. One server’s file system can be exported as NFS over network and control access over it. Other servers can mount these exported mount points locally as an NFS mount. This enables the same file system making available to many systems thus many users. Let’s see NFS configurations in Linux and HPUX.

NFS Configuration file in Linux

We assume the NFS daemon is installed on a server and running in the background. If not check package installation steps and how to start service on Linux. One can check if NFS is running on the server with service or ps -ef command. For NFS server i.e. server exporting directory should have portmap service running.

Make sure you have TCP and UDP port 2049, 111 on firewalls between client and server. It can be in OS firewall, iptables, network firewalls, or security groups in the cloud.

root@kerneltalks # ps -ef |grep -i nfs
root      1904     2  0  2015 ?        00:00:08 [nfsd4]
root      1905     2  0  2015 ?        00:00:00 [nfsd4_callbacks]
root      1906     2  0  2015 ?        00:01:33 [nfsd]
root      1907     2  0  2015 ?        00:01:32 [nfsd]
root      1908     2  0  2015 ?        00:01:33 [nfsd]
root      1909     2  0  2015 ?        00:01:37 [nfsd]
root      1910     2  0  2015 ?        00:01:24 [nfsd]

root@kerneltalks # service nfs status
rpc.svcgssd is stopped
rpc.mountd (pid 1897) is running...
nfsd (pid 1913 1912 1911 1910 1909 1908 1907 1906) is running...
rpc.rquotad (pid 1892) is running...

root@kerneltalks # rpcinfo -p localhost
   program vers proto   port  service
    100000    4   tcp    111  portmapper
    100000    3   tcp    111  portmapper
    100000    2   tcp    111  portmapper
    100000    4   udp    111  portmapper
    100000    3   udp    111  portmapper
    100000    2   udp    111  portmapper
----- output clipped -----

/etc/exports is the configuration file which has all exported volume details along with their respective permissions. /etc/exports follows the format as below :

<export> <host> (options)

where –

  • export is filesystem/directory to be exported
  • the host is hostname/IP to which export is accessible where wile cards are acceptable
  • options are permissions which are ro, rw, sync, async.

Refer below chart which can be used to decide your entry in this file.

NFS config file parameters

Parameter
Example
/my_share server3 (rw, sync) Export /my_share directory for server3 with read write access in sync mode
/my_share * (ro, sync) Export /my_share for any host with read only permission and sync mdoe
/my_share 10.10.2.3 (rw,async) Export /my_share for IP 10.10.2.3 with rw in async.
/my_share server2 (ro, sync) server3 (rw, sync) Exporting to two diff servers with diff permissions
root@kerneltalks # cat /etc/exports
/my_share       10.10.15.2(rw,sync)
/new_share       10.10.1.40(rw,sync)

/etc/exports file can be edited using vi editor or using /usr/sbin/exportfs command.

How to start-stop NFS service in Linux

Once you made the changes in the file you need to restart NFS daemon to take all these changes in effect. This can be done using the service NFS restart command. If your NFS is already running and you just need to take a new configuration in action you can reload config using service NFS reload. To stop NFS you can run service nfs stop command.

root@kerneltalks # service nfs status
rpc.svcgssd is stopped
rpc.mountd (pid 1897) is running...
nfsd (pid 1913 1912 1911 1910 1909 1908 1907 1906) is running...
rpc.rquotad (pid 1892) is running...

How to re-export NFS shares after editing the configuration file

In running the NFS environment, where multiple clients already mounted NFS shares from the NFS server and you need to edit NFS share configuration. You can edit the NFS configuration file and re-export NFS shares using exportfs command.

Make sure only additions happened to config file while reloading config otherwise it may affect already connected NFS shares.

root@kerneltalks # exportfs -ra

How to mount NFS share

At the destination, where export needs to be mounted should have NFS daemon running too. Mounting a share is a very easy two-step procedure.

  1. Create a directory to mount the share
  2. mount share using the mount command.

To make this permanent i.e. mounting share at boot time, make an entry to /etc/fstab like below so that manually mounting after the reboot of server can be avoided.

10.10.2.3:/my_share /tmp/nfs_share nfs defaults 0 0

NFS configuration in HPUX

This part is the same as Linux. In some versions, you need to edit /etc/dfs/dfstab file. This file takes share commands as a per line entry. It can be filled like below :

share -F nfs -o root=server2:server3 /my_share

Above line indicates exporting /my_share directory for server2 and server3 with root account access.

Also, we need to specify NFS_SERVER=1 parameter in /etc/rc.config.d/nfsconf on the NFS server. By default, it is set to 0 i.e. server acts as NFS client. Along with this NFS_CORE and START_MOUNTD needs to be marked to value 1 as well.

How to start-stop NFS service in HPUX

We have covered it here: NFS server start/stop on HPUX

For reloading config file in HPUX, you can run shareall command.

Mounting share

This part is the same as Linux

Errors seen in Linux

If you did not prepare client properly then you might see below error :

mount: wrong fs type, bad option, bad superblock on 10.10.2.3:/mys_hare,
       missing codepage or helper program, or other error
       (for several filesystems (e.g. nfs, cifs) you might
       need a /sbin/mount.<type> helper program)

       In some cases useful info is found in syslog - try
       dmesg | tail or so.

Install nfs-utils, nfs-common packages and you should be able to mount NFS filesystem without any issues.