How to safely remove disk from LVM

Learn how to safely remove the disk from LVM. It’s useful when you need to free up disks from the volume group and re-use somewhere else or replace a faulty disk.

How to safely remove disk from LVM

This article will serve solution for below questions :

  • How to safely remove the disk from LVM
  • How to remove the disk from VG online
  • How to copy data from one disk to other at the physical level
  • How to replace a faulty disk in LVM online
  • How to move physical extents from one disk to another
  • How to free up disk from VG to shrink VG size
  • How to safely reduce VG

We have volume group named vg01 which has 20M logical volume created in it and mounted it on /mydata mount point. Check lsblk output below –

root@kerneltalks # lsblk
NAME         MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
xvda         202:0    0  10G  0 disk
├─xvda1      202:1    0   1M  0 part
└─xvda2      202:2    0  10G  0 part /
xvdf         202:80   0   1G  0 disk
└─vg01-lvol1 253:0    0  20M  0 lvm  /mydata

Now, attach new disk of the same or bigger size of the disk /dev/xvdf. Identify the new disk on the system by using lsblk command again and comparing the output to the previous one.

root@kerneltalks # lsblk
NAME         MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
xvda         202:0    0  10G  0 disk
├─xvda1      202:1    0   1M  0 part
└─xvda2      202:2    0  10G  0 part /
xvdf         202:80   0   1G  0 disk
└─vg01-lvol1 253:0    0  20M  0 lvm  /mydata
xvdg         202:96   0   1G  0 disk

You can see the new disk has been identified as /dev/xvdg. Now, we will add this disk to current VG vg01. This can be done using vgextend command. Obviously, before using it in LVM you need to run pvcreate on it.

root@kerneltalks # pvcreate /dev/xvdg
  Physical volume "/dev/xvdg" successfully created.
root@kerneltalks # vgextend vg01 /dev/xvdg
  Volume group "vg01" successfully extended

Now we have disk to be removed /dev/xvdf and new disk to be added /dev/xvdg in the same volume group vg01. You can verify it using pvs command

root@kerneltalks # pvs
  PV         VG   Fmt  Attr PSize    PFree
  /dev/xvdf  vg01 lvm2 a--  1020.00m 1000.00m
  /dev/xvdg  vg01 lvm2 a--  1020.00m 1020.00m

Observe the above output. Since we created a 20M mount point from disk /dev/xvdf it has 20M less free size. The new disk /dev/xvdg is completely free.

Now, we need to move physical extents from disk xvdf to xvdg. pvmove is the command used to achieve this. You just need to supply a disk name from where you need to move out PE. Command will move PE out of that disk and write them to all available disks in the same volume group. In our case, only one other disk is available to move PE.

root@kerneltalks # pvmove /dev/xvdf
  /dev/xvdf: Moved: 0.00%
  /dev/xvdf: Moved: 100.00%

Move progress is shown periodically. If due to any reason operation interrupted in between then moved PE will remain at destination disks and un-moved PEs will remain on the source disk. The operation can be resumed by issuing the same command again. It will then move the remaining PE out of the source disk.

You can even run it in background with nohup.

root@kerneltalks # pvmove /dev/xvdf 2>error.log >normal.log &
[1] 1639

In the above command, it will run pvmove in the background. It will redirect normal console outputs in normal.log file under the current working directory whereas errors will be redirected and saved in error.log file in the current working directory.

Now if you check pvs output again, you will find all space on disk xvdf is free which means its not been used to store any data in that VG. This ensures you can remove the disk without any issues.

root@kerneltalks # pvs
  PV         VG   Fmt  Attr PSize    PFree
  /dev/xvdf  vg01 lvm2 a--  1020.00m 1020.00m
  /dev/xvdg  vg01 lvm2 a--  1020.00m 1000.00m

Before removing/detaching disk from the server, you need to remove it from LVM. You can do this by reducing VG and opting for that disk out.

root@kerneltalks # vgreduce vg01 /dev/xvdf
  Removed "/dev/xvdf" from volume group "vg01"

Now disk xvdf can be removed/detached from server safely.

Few useful switches of pvmove :

Verbose mode prints more detailed information on the operation. It can be invoked by using -v switch.

root@kerneltalks # pvmove -v /dev/xvdf
    Cluster mirror log daemon is not running.
    Wiping internal VG cache
    Wiping cache of LVM-capable devices
    Archiving volume group "vg01" metadata (seqno 17).
    Creating logical volume pvmove0
    activation/volume_list configuration setting not defined: Checking only host tags for vg01/lvol1.
    Moving 5 extents of logical volume vg01/lvol1.
    activation/volume_list configuration setting not defined: Checking only host tags for vg01/lvol1.
    Creating vg01-pvmove0
    Loading table for vg01-pvmove0 (253:1).
    Loading table for vg01-lvol1 (253:0).
    Suspending vg01-lvol1 (253:0) with device flush
    Resuming vg01-pvmove0 (253:1).
    Resuming vg01-lvol1 (253:0).
    Creating volume group backup "/etc/lvm/backup/vg01" (seqno 18).
    activation/volume_list configuration setting not defined: Checking only host tags for vg01/pvmove0.
    Checking progress before waiting every 15 seconds.
  /dev/xvdf: Moved: 0.00%
  /dev/xvdf: Moved: 100.00%
    Polling finished successfully.

The interval at which command updates the progress can be changed. -i switch followed by a number of seconds can be used to get updates from command on user-defined intervals on progress.

root@kerneltalks # pvmove -i 1 /dev/xvdf

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.